Bu hafta RC-5 kod çözücüden gelen veriyi processingde görmeyi ve bir veri geldiğinde video oynatma komutunu vermeye çalıştım. Farklı tuşlara basınca usb porttan farklı veriler geldiğini algılayabiliyor. Klavyeden de farklı tuşlara basıldığında farklı videolar oynatabiliyor. 3. kodda da 2sini bir araya getirmeye çalıştm. Şu anda kumandadan felen veriyi algılayıp farklı tuşlara basınca farklı videoları açıyor. Fakat videoyu oynatmıyor. Tuşa bastıkça frameler ilerliyor. Ben de bu sorunu çözmek için processing’in forumuna üye oldum. Henüz cevap gelmedi.
Attığım soru:
Hi,
I have a problem with this code. I have a remote control and I can send information from the usb port by using a RC-5 code receiver. I can see that different data is sent once I press different buttons. Then I want to play a certain video when I press each button. For example I want to play video 1 when I press button 1 and video 2 when I press button 2.
I found these codes; I can play the video with this code.
———————————————————–
import processing.video.*;
Movie mov_1,mov_a,nowPlaying;
float f;
float movSpeed;
void setup(){
size(640,480,P2D);
background(0);
mov_1 = new Movie(this, “tation.mov”);
mov_a = new Movie(this, “drawing.mov”);
nowPlaying = mov_1;
nowPlaying.loop();
}
void draw(){
background(0);
image(nowPlaying,0,0,width,height);
}
void movieEvent(Movie _mov){
_mov.read();
}
void keyPressed(){
if (key == ‘a’){
nowPlaying = mov_1;
nowPlaying.jump(0);
nowPlaying.loop();
}
if (key == ‘b’){
nowPlaying = mov_a;
nowPlaying.jump(0);
nowPlaying.loop();
}
}
——————————————————
With the second code I can see that there is a different data that is sent from the serial port
——————————————————
import processing.serial.*;
Serial myPort; // The serial port:
void setup() {
println(Serial.list());
myPort = new Serial(this, Serial.list()[0], 9600);
}
void draw() {
while (myPort.available() > 0) {
char inByte = myPort.readChar();
println(inByte);
}
}
—————————————————-
Then I combined these two codes to be able to play a video once there is a different information sent ( different buttons are pressed).
————————————————–
import processing.serial.*;
import processing.video.*;
Serial myPort; // The serial port:
Movie mov_1,mov_a,nowPlaying;
float f;
float movSpeed;
void setup() {
size(640,480,P2D);
background(0);
mov_1 = new Movie(this, “tation.mov”);
mov_a = new Movie(this, “drawing.mov”);
nowPlaying = mov_1;
nowPlaying.loop();
println(Serial.list());
myPort = new Serial(this, Serial.list()[0], 9600);
}
void draw() {
while (myPort.available() > 0) {
char inByte = myPort.readChar();
println(inByte);
if (inByte == ‘1’) {
nowPlaying = new Movie(this, “tation.mov”);
nowPlaying.loop();
}
if (inByte == ‘2’) {
nowPlaying = mov_a;
nowPlaying.loop();
}
background(0);
image(nowPlaying,0,0,width,height);
}
}
————————————————–
But I have a problem with this code,
I can see that different data is sent from the remote control from the serial monitor. Once I press button 1, video 1 appears and the same happens for button 2 and video 2. However I can only see the first frame of the videos. When I press again I see another frame. I need the videos to play in a loop. How can I solve this problem?
Thanks a lot.